Shenzhen Shi Shi Tong Metal Products Co., Ltd

Last month, Mr. Zhou ordered a  button head torx machine screws  at the Shi Shi Tong screw manufacturer. Mr. Zhou’s requirement for the  button head torx machine screws  is to be anti-slip and anti-loose, and the strength level should reach 8.8. Ask us how to fulfill his requirements. According to Mr. Zhou’s request, we told Mr. Zhou that it is very simple to start level 8.8, using carbon steel 10B21 material. To make it non-slip, it is usually dispensed in the threaded part, or it is made under the head of the screw. If it is loose, it is a gasket or a glue. What kind of choice does Mr. Zhou choose? Mr. Zhou said that the  button head torx machine screws  is glued to the point and is fully glued. Because his screw is used in a large device to fasten the items on a device, prevent this from falling, otherwise it may cause problems in the device. So he will ask for it. After receiving the screws produced by Shi Shi Tong, Mr. Zhou reported ...

Mr. Jin of Tianjin had previously bought the spot of the  button head torx machine screws  on the Internet, because Mr. Jin’s screw head diameter is larger than the conventional one. However, the screws I bought at the time of use were directly twisted off, making Mr. Jin very angry. When Mr. Jin sent the drawings, we found that Mr. Jin’s screw head was too large in diameter and there was no R angle under the head. He asked if there was any sample of the  button head torx machine screws  of Mr. Jin. Can you take a picture under the head? There is no R angle in the picture taken. Generally, when the diameter of the head exceeds the conventional forming range, it is necessary to make an R angle under the head. Otherwise, the head will be directly broken when in use. In the button head of Mr. Jin, there is no R angle under the head of the torx screw, which caused Mr. Jin to find that the screw was directly twisted when it was used. Then we told Mr. Jin that there...

titanium raised countersunk head torx machine screws stainless steel CD ultra low profile torx machine screws aluminum truss head shoulder screw, torx machine screws stainless steel ultra low head screw, torx machine screws carbon steel cap head torx machine screws carbon steel flat head screws button head torx machine screws www.sstls.com www.szsst88.com

There are many manufacturers of metric pan head torx machine screws , but the delivery time is fast and slow. Mr. Peng wants a screw of 150,000 pcs in the pan head and asks for delivery within 7  days. At the beginning, Mr. Peng thought that the delivery time was so urgent, he first looked for him in the vicinity of him, and then Mr. Peng found the Shi   shi   tong screw manufacturer and asked if we could put the   metric pan head torx machine screws   within 7  days. Delivered to him. After evaluating Mr. Peng's drawings, we used the molds used in the production of the metric pan head torx machine screws , and then asked the shop manager whether it could be shipped to the customer within 7  days. The manager replied that if you work overtime, you can do it. Then we told the customer that the   metric pan head torx machine screws  could be produced within 7  days. After the customer placed the order, we immediately sen...