Shenzhen Shi Shi Tong Metal Products Co., Ltd

Low head socket cap screws  can be made of many materials, such as stainless steel, titanium, iron, aluminum and copper. When you choose these materials, you will be limited. Stainless steel low head socket cap screws are not available in stainless steel when the surface is treated with red or purple. Or the screw required by the customer is very complicated, the stainless steel material is very hard, and it is not able to reach the size required by the customer. Carbon steel low head socket cap screws require a long time in the salt spray test, such as 500 hours, this is not possible. Copper, aluminum, and titanium flat-head hex screws are not available when the length of the screws is required. Generally, stainless steel and carbon steel are required. If you want to customize  low head socket cap screws , please send email: annie.li@szsst88.com

People often think that magnets absorb  stainless socket head cap screw , verify their pros and cons and authenticity, do not absorb non-magnetic, think it is good, the goods are genuine; if the absorber is magnetic, it is considered a counterfeit fake. In fact, this is an extremely one-sided, unrealistic way of distinguishing mistakes. There are many types of stainless steel, which can be divided into several categories according to the organizational structure at room temperature: 1. Austenitic type: such as 304, 321, 316, 310, 201, etc.; 2. Martensite or ferrite type: such as 430, 420, 410, etc.; The austenite type is non-magnetic or weakly magnetic, and martensite or ferrite is magnetic. Most of the stainless steels used as decorative tube sheets are austenitic type 304 materials, which are generally non-magnetic or weakly magnetic. However, magnetic properties may occur due to fluctuations in chemical composition or processing conditions due to smelting,...

Mr. Wu had previously purchased a M5 pan head slotted wire screw at the Shi shi tong screw manufacturer, but this time when I contacted us again, the previous one was the same length. He wanted to change the head type. Change the pan head to a low head. And given the head diameter of the metric low head cap screws , ask us how much thickness can be achieved without affecting the use. Mr. Wu said that he has no requirements on the thickness of the head of the metric low head cap screws and can use our existing molds for production. Of course, the thinner the better. According to Mr. Wu's request, we looked at our existing molds and gave us the range of values we can do according to the 13mm diameter of the head. Mr. Wu quickly determined the thickness he wanted. After determining the size, Mr. Wu asked us to provide a new quotation to him. After receiving the offer for the metric low head cap screws , Mr. Wu said that he would give us a reply at the latest 3 days. If you w...