Shenzhen Shi Shi Tong Metal Products Co., Ltd

Australia’s Luis needed a batch of  torx button head screw  stainless  and found the Shi Shi Tong screw manufacturers through the network. In the early days, Luis did not want to place orders in bulk. Because he didn’t know that the  torx button head screw stainless  made by the screw manufacturer of this screw manufacturer could not achieve the effect he wanted. He had not cooperated before and had not understood it, so Luis would have this concern. Later, Shi Shi Tong screw manufacturers and Luis said that during the production process, the production process was shot to Luis through the video, and the size of the screw was measured. After listening to this suggestion, Luis felt very good. He was able to know if the shape and size of the  torx button head screw stainless  was the one he wanted. Therefore, in the process of producing torx button head screw stainless, Shi Shi Tong screws manufacturers have been maki...

The head shot is a problem that often occurs in the screw fastener. Why is there a head shot in the  torx button head  screw stainless ? Generally, the  torx button head screw stainless  will explode, mainly for the following reasons: one is the head shot caused by the wire quality problem of the screw; the other is that the screw wire is not annealed; three are the size of the screw head Too big, exceeding the head shot caused by the moldable range of the wire; four are problems with the mold. When the  torx button head screw stainless  has a head shot, stop it in time to check the cause of the head shot, and then adjust it to reduce the head shot. If the head size of the screw exceeds the molding range of the wire, either the customer can explain the situation and let the customer change the drawing; or replace the production method, but this will basically increase the cost of the screw.